oldshoolelf

LATEST ACTIVITY

• Posted on Hawk F20 in Cycle Registry on 05/06/2012

• Posted in thread: Brake Questions on 01/02/2010 at 4:19PM
  No. Evolvers if put on correctly should stop perfectly with stock pads. They are the best breaks ever
  made they should have enough torque to grab that rim, but you are right that some rims do slide th...

• Posted in thread: GT Bikes on 01/02/2010 at 3:51PM
  Same story cheap parts on those Dynos. The Dyno VFR frame was OK.

• Posted in thread: GT Bikes on 01/02/2010 at 3:48PM
  The GT company did go under for a wile but they are back now. The reason that people did not like GT
  bikes is due to the fact that they had some cheap parts such as hubs cranks levers breaks and the s...

• Posted in thread: Hutch Frames on 01/02/2010 at 3:33PM
  That is a pro raicer they had one called a pro raider also.

• Posted in thread: SE Floval Flyer on 01/02/2010 at 3:28PM
  Yes but remember that it is a 24 inch frame so it is a cruiser so you will need bars about 6 and 1/2
  inches tall I would suggest Fly Expert XL bars they are 26 inches wide and 6.5 inches high but they...

• Posted in thread: Elf BMX on 01/02/2010 at 3:07PM
  What kind of Elf is it. I can tell you. Elf went out of buisnes. They were pricey new and that is probly
  why they are gone now.

• Posted in thread: Ideas for a track on 01/02/2010 at 3:01PM
  Use a good shuvel

• Posted in thread: 3 Piece Crank on 01/02/2010 at 2:55PM
  Do not buy a haro 3 piece forged crank they are so heavy. I had a friend that had a set they stink. I
  would not if I were you.

• Posted in thread: Old School Frames on 01/02/2010 at 2:51PM
  And always remember Elf