Two Spoke Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
72 Posts
Exactly my intention, the question is how. Checking out possibilities.
Henry,

I would consider cutting the frame just behind the BB and the cut on top would be just behind of the seat post. Those 2 areas shouldn't be too difficult to access. I would also consider cutting the stays completely off at the rear brackets and replacing them with tubes of the appropriate lengths. Is the frame steel? I think a steel frame would be much easier to work with. Perhaps you could get the needed tubing from a donor frame. Look before you leap!

Good Luck!

BobH.
 

·
Registered
Joined
·
350 Posts
needs banana seat and ape-hanger bars.





...or better yet, get a bike that's designed for riding in that position, so that you don't have the weight distribution problems caused by your design (pic chosen at random from the RANS site):

 

·
Registered
Joined
·
94 Posts
Show pics of your accomplishments before asking for input. Works better that way....and of course, with pictures to prove it.
 
1 - 7 of 7 Posts
Top