Two Spoke Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
Hi everyone, this is my first post on this forum. I made this account becqus i ran into a few issues while restoring a schwinn super le tour road bike. I believe that it is from the 80s if that is of concern. I am not sure how to remove the bottom bracket on the bike. It has super maxy cranks that are currently removed. I am looking to remove then grease the BB. If anyone knows how to go about doing this it would be appreciated. Thanks for reading
 

·
retromike3
Joined
·
274 Posts
removing B.B.

I think that you are dealing with a Sugeno BB. It has a tapered spindle that is square so you will need a crank removal tool.

I think the best place for instructions is Sheldon Browns web page for all of that info. here's a link http://sheldonbrown.com/tooltips/bbadj.html

Mikee-I have done a Lot of these, But not lately -Frye
 

·
Registered
Joined
·
24 Posts
Discussion Starter #4
Yes it is a sugino tapered shaft BB. So i believe it is a left hand thread according to your link, being a schwinn super le tour made in japan i believe. Thanks for the link by the way
 
1 - 5 of 5 Posts
Top